Pedals

Time to take your eBike to the next level. With a pin layout derived from our downhill pedals for maximum grip, the ePedal is specifically designed for eBikes with its narrow profile for optimum cornering clearance. Compact cartridge bushings paired with a sealed bearing system keep things running smoothly for miles and miles. Topping it off is an electric design with full-coverage laser etching on a premium finish. - Body: CNC-machined 6061 Aluminum - Axle: CNC-machined Cro-Mo - Bearings: Ultralight compact bushings + sealed bearings - Replaceable pins - Size: 102mm x 108mm - Weight: 170g (each)

The new OOZY Reboot Pedal - 100% the same award-winning OOZY Pedal platform that SPANK Industries has been manufacturing for years, but now with crank boot compatible axle and fresh new full colour anodized finishes for 2021. - Super slim 12mm for maximized pedal clearance - CNC weight-optimized trail pedal at 360g per set - Forged alloy body is shot-peened and anodized for increased durability - Equipped with hollow taper Chromoly steel axles for unmatched strength - Sealed bearings and IGUS bushings - 18 preassembled pins in virtual concavity for ultimate grip - Recommended for: ASTM 5, All mountain, enduro, trail, E-Bike - Crank boots compatible axle

- Large platform 100mmx105mm size with concave profile combines support with ultimate grip - Strong and lightweight one piece alloy body - Forged chromoly axle delivers strength and durability - Shot-peen surface increases fatigue life and impact resistance

- Crank Boot Compatible Axles - Full Anodized Finish - 12mm Thin—Massive 11x11cm Platform - Cold Forged Alloy Pedal Body - Hollow Taper Scandium Enriched Steel Axle - Chamfered Leading Edges for Improved Clearance and Reduced Impact Forces - Chamfered Side Edges for Improved Cornering Clearance - Oversized Sealed Full Compliment Inboard Industrial Bearing - Sealed Outboard IGUS Bushing - 18 Adjustable Pins per Pedal - CNC Optimized, Full Sized Hex Head, Rear Loading Pins Improve Durability and Maintenence - Inboard Friction Seal Prevents Contamination and Reduces Unwanted Pedal Spin

- Full Anodized finish - 16-12mm concave platform - 100mm x 105mm platform - CNC Alloy Pedal Body - Hollow Taper Scandium Enriched Steel Axle - Chamfered Leading Edges for Improved Clearance and Reduced Impact Forces - Oversized Sealed Full Compliment Inboard Industrial Bearing - Sealed Outboard IGUS Bushing - CNC Optimized, Full Sized Hex Head, Rear Loading Pins Improve Durability and Maintenence - Inboard Friction Seal Prevents Contamination and Reduces Unwanted Pedal Spin

- Full Anodized finish - 16-12mm concave platform - 110mm x 105mm platform - CNC Alloy Pedal Body - Hollow Taper Scandium Enriched Steel Axle - Chamfered Leading Edges for Improved Clearance and Reduced Impact Forces - Oversized Sealed Full Compliment Inboard Industrial Bearing - Sealed Outboard IGUS Bushing - CNC Optimized, Full Sized Hex Head, Rear Loading Pins Improve Durability and Maintenence - Inboard Friction Seal Prevents Contamination and Reduces Unwanted Pedal Spin

The Spoon Pedal Axle Rebuild kit includes the internal parts required to completely rebuild a set of Spoon pedals. - Pins available separately

- 100% SDG DNA in the design of these pedals - Utilizes a flat profile which allows optimal grip for flat pedal shoes - Composite body design - Minimal 17mm pedal body height maximizes the pedal feel - 105mm x 110mm Platform - Ramped and undercut traction pad - 18 pins, replaceable, bottom loaded - Bearing/bushing design for maximum durability. Fully rebuildable pedal design - Cro-Mo axle

- 90mm x 90mm Small Platform - Cro-Mo Axle - 6 rear loading, replaceable steel pins - Gripper profile for enhanced pedal traction - Fully sealed and lightweight DU bushing design

Slater pedals from SDG. - 9/16" spindles - Composite/plastic - Platform

- 90mm x 90mm Small Platform - Cro-Mo Axle - 6 rear loading, replaceable steel pins - Gripper profile for enhanced pedal traction - Fully sealed and lightweight DU bushing design - Pedal Weight: 310g

- 90mm x 90mm Small Platform - Cro-Mo Axle - 6 rear loading, replaceable steel pins - Gripper profile for enhanced pedal traction - Fully sealed and lightweight DU bushing design

- Pedal Weight (pair): 352g - Size: 102 x 96 x 11 mm - Body Material: aluminum extruded / CNC machined - Spindle: CNC machined cr-moly - Pedal Bearings: EVO+ system - Pins: replaceable grip pins

The AE05 Evo+ Platform pedals have replaceable pins on a concave, extruded, CNC-machined aluminum body for a stiff and responsive feel, while dual DU bushing bearings keep them turning smoothly. These 17mm-thick pedals provide tons of clearance. - Platform: 100 x 96 x 17mm (12 mm center) - Constructed from extruded aluminum with CNC machining - Dual DU bushing internals - 10 replaceable pins per side - 9/16"

- Pedal Weight: (pair) 360g - Size: 100 x 96 x 17 mm (12 mm center ) - Body Material: aluminum extruded / CNC machined - Spindle: CNC machined cr-moly - Pedal Bearings: EVO+ system - Pins: EVO1 replaceable grip pins

The AE05 Evo+ Platform pedals have replaceable pins on a concave, extruded, CNC-machined aluminum body for a stiff and responsive feel, while dual DU bushing bearings keep them turning smoothly. These 17mm-thick pedals provide tons of clearance. - Platform: 100 x 96 x 17mm (12 mm center) - Constructed from extruded aluminum with CNC machining - Dual DU bushing internals - 10 replaceable pins per side - 9/16"

HT's AN14A Pedals are simple, reliable platform pedals. CNC'd aluminum body with replaceable pins, and a low profile for extra ground clearance. - Platform: 94 X 95 X 17mm - 10 replaceable pins per side - 9/16"

- Pedal Weight (pair): 398g - Size: 110 x 100 x 17 mm - Body Material: aluminum extruded / CNC machined - Spindle: CNC machined cr-moly - Pedal Bearings: sealed bearings / IGUS bushings - Pins: replaceable SAP (1/8" x 9 mm) pins / 1 mm washer

- Extruded and CNC machined aluminum body - Sealed bearing needle bearing and IGUS bushing - 10 replaceable pins per side - Platform dimensions: 100 x 100 x 16.6mm

Designed in conjunction with the super-stylish Swedish giant Martin Soderstrom, the ANS10 Supreme offers the perfect amount of traction, platform and feel. - Platform: 100 x 100 x 16.6mm - Constructed from extruded aluminum with CNC machining - Dual DU bushing internals - 10 replaceable pins per side - 9/16"

- Features New for Kids BMX Racing - Pedal Weight (pair): 260g - Size: 68 x 83.5 x 17 mm - Body Material: aluminum extruded / CNC machined - Spindle: CNC machined cr-moly - Pedal Bearings: sealed bearings / DU bushings - Pins: replaceable grip pins

- Pedal Weight (pair): 400g - Cleat Weight (pair): 64g - Size: 73.2 x 94 x 17 mm - Body Material: aluminum diecast - Spindle: CNC machined cr-moly - Pedal Bearings: sealed bearings / DU bushings - Cleat System: X1E/ X1/ X1F (HT exclusive system) - Pins: replaceable grip pins

- Pedal Weight: (pair) 305g - Cleat Weight: (pair) 64g - Size: 56 x 41 x 17.5 mm - Body Material: aluminum extruded / CNC machined - Spindle: CNC machined cr-moly - Pedal Bearings: sealed bearings / IGUS bushings - Cleat System: X1E / X1 (HT exclusive system)

- Pedal Weight (pair): 260g - Size: 102 X 96 X 11 mm - Body Material: magnesium extruded / CNC machined - Spindle: CNC machined, cr-moly - Pedal Bearings: thrust bearings / IGUS bushings - Pins: replaceable SAP (1/8" x 8mm) pins

- Pedal Weight (pair): 260g - Size: 102 X 96 X 11 mm - Body Material: magnesium extruded / CNC machined - Spindle: CNC machined Ti [gold] - Pedal Bearings: EVO+ system - Pins: replaceable grip pins

- Premium reinforced nylon composite body - Dual sealed bearings and DU bushing - 8 replaceable pins per side - Platform dimensions: 100 x 105 x 18mm

- Pedal Weight (pair): 345g - Size: 107 X 105 X 18 mm - Body Material: Nylon reinforced composite - Spindle: CNC machined Crmo - Pedal Bearings: dual sealed bearing + one DU bushing - Pins: replaceable grip pins - Based off of technoloy for the AN14A pedal

- Pedal Weight: (pair) 377g - Cleat Weight: (pair) 64g - Size: 68 x 84 x 17 mm - Body Material: aluminum extruded / CNC machined - Spindle: CNC machined cr-moly - Pedal Bearings: sealed bearings / IGUS bushings - Cleat System: X1 / X1F (HT exclusive system) - Pins: replaceable SP7 (M4 x 6mm) pins

- Pedal Weight (pair): 377g - Cleat Weight (pair): 64g - Size: 68 x 84 x 17 mm - Body Material: Aluminum extruded / CNC machined - Spindle: CNC machined cr-moly - Pedal Bearings: Sealed bearings / IGUS bushings - Cleat System: X1 / X2 (HT exclusive system) - Pins: replaceable SP7 (M4 x 6mm) pins

- Pedal Weight (pair): 460g - Cleat Weight (pair): 64g - Size: 85 X 94 X 14 mm - Body Material: aluminum extruded / CNC machined - Spindle: CNC machined cr-moly - Pedal Bearings: sealed bearings / IGUS bushings - Cleat System: X1E / X1 / X1F (HT exclusive system) - Pins: replaceable grip pins