Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

29-Inch

Eclypse DB929/SRAM 900 29-inch Rear
$769.99
- Eclypse DB929 Carbon - One piece molding - Inner Rim Width: 29 mm - Outer rim Width: 35 mm - Rim Height: 23.5 mm - Presta valve - 28 holes - DT Champion - Black - Tubeless ready, requires tubeless tape/rim strip, not included
Mavic XA Elite Carbon 29-inch Front
$765.00
The advantages of carbon rims are well-known by now: They are light, they are stiff, and they can be built to be nearly indestructible. But with this new trail-riding wheel, we also focused on ride quality. There is such a thing as too stiff, and the XA Elite was developed over time to find the perfect balance that also includes just enough vertical compliance to smooth out the ride quality and optimize tire performance. It all starts with the layup of the carbon fiber itself. We went through several iterations to arrive at the perfect formula, as deemed by our experienced test riders. The rims have an asymmetric shape and are 30mm wide, perfect for getting the most out of just about any trail riding tire. We use 24 straight-pull spokes to further dial in the spot between lateral stiffness and vertical compliance. The hubs feature our new ID 360 freewheel for durability and fast engagement. They are set up for 6-Bolt discs and compatible with all current axle standards, including Standard and Boost spacing. Lightweight feel (1650g) for fast climbing and agility on the trail - Full-carbon rim delivers quick acceleration and a responsive feel. Better traction and control, plus a reduced risk of punctures - 30mm internal width rims are optimized for larger trail tires. - Hookless rim profile reduces tire burbs and creates stronger rim. More control, more confidence on the trail - Laterally stiff with just enough vertical compliance - Two-cross spoke pattern on the front and rear creates a smooth, comfortable ride quality.
Crank Brothers Cobalt 3 Boost Wheelset
$750.00
Elite-level aluminum wheels for XC/trail Massively different - Simple and beautiful, our unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, black + red anodizing - Rim width: 21mm - Rim depth: 19.5mm - Spoke material: Sapim stainless steel - Spoke butting: 2.0/1.6/2.0 - Spoke length: 166mm - Spoke pins: hollow 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: cobalt, 6061-t6 - Front hub bearing: sealed cartridge 6804 (x2) - Front hub end caps: 15mm (installed), 9mm (included) - Rear hub material: cobalt, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, alloy - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 29-inch, 1735g per set - Weight: 27.5-inch, 1650g per set - E-bike compatible: urban/XC e-bikes up to 350 watts max
Crank Brothers Iodine 3 Boost 29-inch Wheelset
$750.00
Elite-level aluminum wheels for all mountain Massively different - Simple and beautiful, our unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, black + silver anodizing - Rim width: 23mm - Rim depth: 19.5mm - Spoke material: Sapim stainless steel - Spoke butting: 2.0 / 1.8 / 2.0 - Spoke length: 166mm - Spoke pins: hollow 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: iodine, 6061-t6 - Front hub bearing: sealed cartridge 6805 (x2) - Front hub end caps: 15mm (installed), 20mm (included) - Rear hub material: iodine, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, alloy - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 29-inch, 1850g per set - Weight: 27.5-inch, 1780g per set - E-bike compatible: trail/AM e-bikes up to 350 watts max
Crank Brothers Opium 3 Wheelset 29-inch
$750.00
Elite-level aluminum wheels for DH/freeride. Massively different: simple and beautiful, the unique wheel design is based around principles of strength, stiffness and acceleration. Faster to accelerate: low rotational inertia. Unique wheel design distributes mass closer to the hub for faster acceleration and deceleration. Tubeless-ready, hole-less rims: stronger and no rim tape required for tubeless setup. Stronger and stiffer: Twinpair spoke technology. Designed using the strongest shape in construction, the triangle, to maximize strength and stiffness. Beautifully simple, single spoke length: easy to true and replaceable without removing tire.
Crank Brothers Zinc 3 Wheelset
$750.00
Elite-level aluminum wheels for gravel/cx Details - Simple and beautiful — our unique wheel design is based around principles of strength, stiffness, and acceleration. - Low rotational inertia — unique wheel design distributes mass closer to the hub for faster acceleration and deceleration. - Twin pair spoke technology — designed using the strongest shape in construction, the triangle, to maximize strength and stiffness. - Single spoke length — easy to true and replaceable without removing tire. - Tubeless ready / hole-less rims — stronger and no rim tape required for tubeless setup. Specs - Freehub: 3-pawl, 21T, alloy - Front hub end caps: 15mm (installed), 9mm (included) - Internal rim width: 21mm - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Rim finish: Shot peen, black anodizing - Rim material: 6061-t6, smooth weld joint - Skewers: Skewers not included, available separately - Spoke material: Stainless steel - Warranty: 2 years - Weight: 1645g - XD driver: XD driver compatible, available separately
Whisky Parts Co. No.9 36w Front 29-inch
$725.00
Whisky No.9 36w carbon wheels are made for all-around trail riding and off-road touring; striking a balance between width and weight. Intended to support a wide range of modern mountain bike tires, the No.9 36w rims have a 30mm internal width, feature hookless beads for easy tubeless setup and impact resistance. The wider rim width creates a broad base for the tire casing to support side knobs better, for increased comfort and traction. - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability - Each wheel includes a Whisky tubeless valve and tape
Whisky Parts Co. No.9 40w Front 29-inch
$725.00
Whisky No.9 40w Wheels are made to be wide, light, and versatile. Optimized for use with wide trail and plus-sized tires, the No.9 40w rims have a 35mm internal width, feature hookless beads for easy tubeless set up and impact resistance. The No.9 40w wheels offer stiff, lightweight performance gains across the board; these disc brake-specific wheels have a minimalist design and clean aesthetics. - Built with DT Swiss 350 hubs, 32 DT Competition Double Butted Spokes, and brass nipples to maximize performance and reliability - An ideal option for short- to mid-travel mountain bikes, plus tire set ups, or off-road touring rigs - Includes tubeless valves and pre-installed Whisky Tubeless tape with an additional roll for future use - Recommended weight limit: 240lbs - 50psi max tire pressure
Spank 350 Vibrocore 29-inch Wheelset
$699.00
- High performance Wheelset with internal vibration damping, ideal for DH and Freeride. - Unique profile with low sectional profile height and wide width, which adds radial compliance, while keeping high lateral stiffness. - Improved radial compliance for better traction over bumps and chatter, while reducing negative feedback to the rider. Performance and comfort enhanced. - Vibrocore inner well, reduces the transmission of harmful vibration frequencies, meaning less vibration for the suspension and rider, also increasing the fatigue life of the rim. - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles.
Eclypse DB929/Novatec 29-inch 712 Rear
$649.99
- Eclypse DB929 Carbon - One piece molding - Inner Rim Width: 29 mm - Outer rim Width: 35 mm - Rim Height: 23.5 mm - Presta valve - 28 holes - DT Champion - Black - Tubeless ready, requires tubeless tape/rim strip, not included
Eclypse DB929/Novatec D772 29-inch Rear
$649.99
- Eclypse DB929 Carbon - One piece molding - Inner Rim Width: 29 mm - Outer rim Width: 35 mm - Rim Height: 23.5 mm - Presta valve - 28 holes - DT Champion - Black - Tubeless ready, requires tubeless tape/rim strip, not included
Spank Spank 350 29-inch Wheelset
$649.00
- Weight optimized wheelset ideal for Trail/AM/Enduro bikes looking for a wide profile - Low sectional profile height and wide width, adds radial compliance, while keeping high lateral stiffness - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles
Eclypse DB929/Factor 29-inch Front
$629.99
- Eclypse DB929 Carbon - One piece molding - Inner Rim Width: 29 mm - Outer rim Width: 35 mm - Rim Height: 23.5 mm - Presta valve - 28 holes - DT Champion - Black - Tubeless ready, requires tubeless tape/rim strip, not included
Eclypse DB929/SRAM 900 29-inch Front
$629.99
- Eclypse DB929 Carbon - One piece molding - Inner Rim Width: 29 mm - Outer rim Width: 35 mm - Rim Height: 23.5 mm - Presta valve - 28 holes - DT Champion - Black - Tubeless ready, requires tubeless tape/rim strip, not included
Eclypse DB929/Novatec D771 29-inch Front
$609.99
- Eclypse DB929 Carbon - One piece molding - Inner Rim Width: 29 mm - Outer rim Width: 35 mm - Rim Height: 23.5 mm - Presta valve - 28 holes - DT Champion - Black - Tubeless ready, requires tubeless tape/rim strip, not included
Eclypse DB929/Novatec D881 29-inch Front
$609.99
- Eclypse DB929 Carbon - One piece molding - Inner Rim Width: 29 mm - Outer rim Width: 35 mm - Rim Height: 23.5 mm - Presta valve - 28 holes - DT Champion - Black - Tubeless ready, requires tubeless tape/rim strip, not included
DT Swiss HX 1501 Spline ONE 30 29-inch Front
$587.90
When you head into trouble on the trail, be it up or down, the HX 1501 SPLINE ONE 30 will get you out victorious. It has the power to attack burly terrain and to go fast everywhere else. Sitting right in the middle of the strength-to-weight and strength-to-width range, it works with many tire sizes and is the ideal choice for all E-MTB's meant to be ridden on proper MTB terrain. High end through and through, from the lightweight Ratchet System hubs to the industry-leading alloy rim and profile design, the HX 1501 SPLINE ONE 30 isn't a one-day wonder, but a trusty long-term partner.
Crank Brothers Cobalt 3 XC 29-inch Wheelset
$584.25
Elite-level aluminum wheels for XC/trail. - Simple and beautiful — our unique wheel design is based around principles of strength, stiffness, and acceleration. - Low rotational inertia — unique wheel design distributes mass closer to the hub for faster acceleration and deceleration. - Twin pair spoke technology — designed using the strongest shape in construction, the triangle, to maximize strength and stiffness. - Single spoke length — easy to true and replaceable without removing tire. - Tubeless ready / hole-less rims — stronger and no rim tape required for tubeless setup.
No Image
$550.00
Enthusiast-level aluminum wheels for XC/trail Massively different - Simple and beautiful, unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, black anodizing - Rim width: 21mm - Rim depth: 19.5mm - Spoke material: stainless steel - Spoke butting: 2.0/1.6/2.0 - Spoke length: 166mm - Spoke pins: solid 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: cobalt, 6061-t6 - Front hub bearing: sealed cartridge 6804 (x2) - Front hub end caps: 15mm (installed), 9mm (included) - Rear hub material: cobalt, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, steel - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 29-inch, 1790g per set - Weight: 27.5-inch, 1710g per set - E-bike compatible: urban/XC e-bikes up to 350 watts max
No Image
$550.00
Enthusiast-level aluminum wheels for XC/trail Massively different - Simple and beautiful, unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, black anodizing - Rim width: 21mm - Rim depth: 19.5mm - Spoke material: stainless steel - Spoke butting: 2.0/1.6/2.0 - Spoke length: 166mm - Spoke pins: solid 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: cobalt, 6061-t6 - Front hub bearing: sealed cartridge 6804 (x2) - Front hub end caps: 15mm (installed), 9mm (included) - Rear hub material: cobalt, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, steel - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 29-inch, 1790g per set - E-bike compatible: urban/XC e-bikes up to 350 watts max
No Image
$550.00
Enthusiast-level aluminum wheels for all mountain Massively different - Simple and beautiful, our unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, flat black anodizing - Rim width: 23mm - Rim depth: 19.5mm - Spoke material: stainless steel - Spoke butting: 2.0 straight gauge - Spoke length: 166mm - Spoke pins: solid 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: iodine, 6061-t6 - Front hub bearing: sealed cartridge 6805 (x2) - Front hub end caps: 15mm (installed), 20mm (included) - Rear hub material: iodine, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, steel - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 29-inch, 1910g per set - Weight: 27.5-inch, 1845g per set - E-bike compatible: trail/am e-bikes up to 350 watts max
Mavic Crossmax Pro Rear
$550.00
Engineered with a rim that’s precisely machined for lighter weight and uncompromising strength, the Crossmax Pro elevates the XC experience—whether you’re racing, training, or just shredding trails. With an internal width of 22mm and our patented ISM 4D technology, the rim provides a lightweight and dynamic ride quality. The ISM 4D process machines the rim between each spoke hole. This reduces weight without compromising strength, making it easier to climb and accelerate. The Zicral spokes and Isopulse (rear) lacing increase wheel stiffness for sharp, predictable handling. This is a fully tubeless UST system without the use of tape, making it easy to experience the benefits of tubeless, including better traction and fewer punctures. The system is compatible with quick release and 15mm thru-axle on the front, quick release and 12mm thru-axle in the rear. Accelerate faster, use less energy on climbs - ISM 4D machined rim is lighter without compromising strength. - 24 Zicral spokes with Isopulse lacing (rear) ensures a stiff and responsive ride. Ride challenging XC terrain with more control. - 22mm hookless rim for increased comfort, control, and traction Better traction, reduced risk of flats with UST tubeless technology - Simple tubeless tire setup with no tape needed - Run lower tire pressure for increased control and comfort.
Mavic XA Pro 29-inch Rear
$550.00
Engineered with the same spirit of innovation that made Mavic the first to create the mountain bike wheel system, and also the first to introduce the tubeless mountain bike wheel system, this versatile off-road wheelset elevates the trail riding experience. Made with a lightweight aluminum rim that has zero compromises in strength and lateral stiffness, it delivers dependable all-around performance on a variety of trail conditions and terrain. The rim features our ISM 4D technology to remove unnecessary material and also Fore drilling for the spoke attachment. This minimizes rotational weight, giving them a snappy, dynamic ride quality. The rims are 25mm wide with UST technology, making it easy to experience all the benefits of tubeless tires, including better traction, increased control, and a reduced risk of flats. The wheels are built up with 24 bladed Zicral spokes for lateral stiffness and just enough vertical compliance. Dynamic and lightweight feel for efficient climbing and added agility - ISM 4D machining makes the wheel lighter without compromising durability. - 25mm internal rim width Proven technologies for performance and durability - 24 straight-pull bladed Zicral spokes, front and rear - UST tubeless technology for improved traction and control and reduced risk of punctures - Fore drilling on the rims UST Tubeless Ready design gives you total control on challenging terrain - User-friendly tubeless technology for better traction and control with reduced risk of punctures - Wheels ship with tubeless rim tape installed.
DT Swiss XM 1700 SPLINE 29-inch Rear
$539.90
The XM 1700 SPLINE wheels were designed to dominate the mountain. Light and robust welded rims with perfect tubeless compatibility for grip and puncture resistance. Built on reliable 350 hubs with 36 tooth ratchet engagement. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for All Mountain applications
DT Swiss XM 1501 Spline ONE 30 29-inch Front
$534.00
The XM 1501 SPLINE ONE 30: a whole lot of wheel. Fit with high volume tires, it will eat up the roughest of descents you can throw at it and it'll climb to those trailheads with ease. The perfect size for demanding all-mountain riders, it features DT's famous aluminum rim construction, proven on World Cup downhill and EWS levels. The DT Swiss wheel build quality and the unmatched Ratchet System hubs complement this extremely capable package, made to dominate the mountain.
DT Swiss H 1700 Spline 30 29-inch Rear
$505.90
It's a fact: On an E-MTB you run into trail sections much faster than you have ever before considered possible. The H 1700 SPLINE 30 has the power to get you out of such situations as a winner and not face down in the dirt. Steering precision is covered by the strong spokes and the trademark DT Swiss wheel build with high and even spoke tension. The rim can take tires suited for fast riding on rugged terrain and supports them perfectly, even at low pressures. Reliable Ratchet System hubs finally make sure that you can come back and attack those gnarly sections of trail time and time again.
Mavic Crossmax Pro Front
$450.00
Engineered with a rim that’s precisely machined for lighter weight and uncompromising strength, the Crossmax Pro elevates the XC experience—whether you’re racing, training, or just shredding trails. With an internal width of 22mm and our patented ISM 4D technology, the rim provides a lightweight and dynamic ride quality. The ISM 4D process machines the rim between each spoke hole. This reduces weight without compromising strength, making it easier to climb and accelerate. The Zicral spokes and Isopulse (rear) lacing increase wheel stiffness for sharp, predictable handling. This is a fully tubeless UST system without the use of tape, making it easy to experience the benefits of tubeless, including better traction and fewer punctures. The system is compatible with quick release and 15mm thru-axle on the front, quick release and 12mm thru-axle in the rear. Accelerate faster, use less energy on climbs - ISM 4D machined rim is lighter without compromising strength. - 24 Zicral spokes with Isopulse lacing (rear) ensures a stiff and responsive ride. Ride challenging XC terrain with more control. - 22mm hookless rim for increased comfort, control, and traction Better traction, reduced risk of flats with UST tubeless technology - Simple tubeless tire setup with no tape needed - Run lower tire pressure for increased control and comfort.
Mavic XA Pro 29-inch Front
$450.00
Engineered with the same spirit of innovation that made Mavic the first to create the mountain bike wheel system, and also the first to introduce the tubeless mountain bike wheel system, this versatile off-road wheelset elevates the trail riding experience. Made with a lightweight aluminum rim that has zero compromises in strength and lateral stiffness, it delivers dependable all-around performance on a variety of trail conditions and terrain. The rim features our ISM 4D technology to remove unnecessary material and also Fore drilling for the spoke attachment. This minimizes rotational weight, giving them a snappy, dynamic ride quality. The rims are 25mm wide with UST technology, making it easy to experience all the benefits of tubeless tires, including better traction, increased control, and a reduced risk of flats. The wheels are built up with 24 bladed Zicral spokes for lateral stiffness and just enough vertical compliance. Dynamic and lightweight feel for efficient climbing and added agility - ISM 4D machining makes the wheel lighter without compromising durability. - 25mm internal rim width Proven technologies for performance and durability - 24 straight-pull bladed Zicral spokes, front and rear - UST tubeless technology for improved traction and control and reduced risk of punctures - Fore drilling on the rims UST Tubeless Ready design gives you total control on challenging terrain - User-friendly tubeless technology for better traction and control with reduced risk of punctures - Wheels ship with tubeless rim tape installed.
Crank Brothers Cobalt 1 Wheelset (29-inch)
$399.00
To add some speed and a little style to your 29er, throw on a set of Crank Brothers' Cobalt 1 wheels. These lightweight wonders boast tubeless-compatible aluminum rims that keep the weight down to 1,975 grams for the set and they boast machined aluminum hubs with sealed bearings that feel like they'll spin forever. Crank Brothers Twin Spoke technology provides superior strength and stiffness with only 24 spokes.
Mavic Deemax Elite 29-inch Rear
$385.00
Gravity and trail shredders ask a lot from their wheels. For those who like to mix it up on rough, technical terrain, here is the perfect wheel choice. The Deemax Elite features cutting-edge design to help you push new limits and get the most out of your bike. The 30mm wide rims are built specifically for large tires: 2.25" up to 3.0". The rims are engineered with just enough vertical compliance to absorb some of the impacts that could damage a tire. Our innovative ISM 4D rim technology removes excess material, which makes the rims as light as possible without sacrificing strength. They are built up with 28 steel, double-butted spokes front and rear and come with tubeless tape that makes it easy to experience all the benefits of UST tubeless: better traction, a smoother ride quality, and a reduced risk of flats. From aggressive trail riding days to enduro races and laps in the bike park, experience a wheel that's made for the way you ride. Improved tire performance - 30mm wide rims support large tires: from 2.25 up to 3.0". - UST for optimal tubeless function - Vertically compliant to absorb some of the impacts that could damage a tire Have better control on technical trails - ISM 4D rim for the perfect balance of stiffness and compliance, weight, and strength - Optimized spoke material and lacing provide a supple yet responsive and predictable ride. Feel secure on challenging trails and terrain - Confidence inspired by Mavic's quality control and innovative design